Tharo PA1200CW Corner Wrap Printer Applicator

The Tharo PA1200 Printer/Applicator is easy to use, with minimal adjustments necessary and quick setup and changeover for applying labels to either the top or side of the product.

For specialty applications requiring a label to wrap–around a corner. This applicator can be setup to wrap onto the front and top of a product or the front and side of a product. Applies up to 13” labels in a timely fashion. Why put two labels on a box if you can get away with just one?

Specifications:

Minimum Label Size: 4" x 4"
Maximum Label Size: 4.4" x 13.0"
Placement Accuracy: Stationary: +/- 0.01" (.25mm) or Moving: +/-0.125" (3mm) (for example: conveyor belt applications)
Speed: Up to 15 products per minute*
Weight of Applicator: 37lbs (17kg)
Weight of Stand: 120lbs (55kg)
Swing Length: 26" (660.4mm)
Air Requirement: 75 to 90 psi (5 to 6 bar)
Printer Type: Tharo H-Series Direct Thermal or Thermal Transfer Printer
Power Source: Switchable: 100V 60Hz or 230V 50Hz
Environmental: Temp 50-95°F (10-35°C) at 10-85% humidity
Standards: Built to CE safety and emissions standards. RoHS compliant upon request.
* Speeds are approximate. Product size, label size and conveyor speed will determine actual throughput.