Tharo PA1200t Tamp Apply Printer Applicator

The Tharo PA1200 Printer/Applicator is easy to use, with minimal adjustments necessary and quick setup and changeover for applying labels to either the top or side of the product.

The PA1200t's customizable tamp pad comes pre-fitted with a nonstick plastic surface to suit your labeling needs. This applicator is easy to use, with minimal adjustments necessary and quick setup and changeover for applying labels to either the top or side of variable or common height products.

The PA1200t can be adapted to work with Tharo, Datamax (PA1200td) or Zebra (PA1200tz) printers.

Specifications:

Minimum Label Size: 2" x 1" (50.8mm x 25.4mm)
Maximum Label Size: 4.4" x 8.0" (114mm x 203mm)
Placement Accuracy: Stationary: +/- 0.01" (.25mm) or Moving: +/-0.125" (3mm) (for example: conveyor belt applications)
Speed: Up to 60 labels per minute*
Weight of Applicator: 27lbs (12kg)
Weight of Stand: 120lbs (55kg)
Standard Stroke Length: 17" total (432mm) (10" (254mm) below table) Custom length cylinders are available upon request.
Air Requirement: 75 to 90 psi (5 to 6 bar)
Printer Type: Tharo H-Series, Datamax I-Class and Zebra Z4MPlus Direct Thermal or Thermal Transfer Printers
Power Source: Switchable: 100V 60Hz or 230V 50Hz
Environmental: Temp 50-95°F (10-35°C) at 10-85% humidity
Standards: Built to CE safety and emissions standards. RoHS compliant upon request.
* Speeds are approximate. Product size, label size and conveyor speed will determine actual throughput