Label Printer/Applicator: Tharo Systems Introduces Pa1200fa Front Apply Label Printer/Applicator

This Printer/Applicator can print and apply labels to the leading side of a product moving down a conveyor.

The PA1200fa was designed, engineered and built by Tharo Systems and is currently available using the Tharo H-Series thermal/thermal transfer printers with print resolutions of 203 or 300 dpi.

After a label is printed, it is stripped from the liner and held by suction on the applicator tamp pad. The tamp pad is mounted on a heavy-duty swing arm that extends over a conveyor and tamps the label to the product. Labels can be as small as 2" x 1" and up to 4.4" x 8".

The Pa1200fa is for specialty applications requiring the front of a product to be labeled. It is accurate and cost effective. Used to apply a label to the front of a product where the orientation of the product cannot be changed due to product line constraints.

Specifications

Minimum Label Size: 3" x 1 " (76.2mm x 25.4mm)
Maximum Label Size: 4.5" x 8.0" (114mm x 203mm)
Placement Accuracy: Stationary: +/- 0.01" (.25mm) or Moving: +/-0.125" (3mm) (for example: conveyor belt applications)
Speed: Up to 20 products per minute*
Weight of Applicator: 37 lbs (17kg)
Weight of Stand: 120 lbs (55kg)
Swing Length: 26" (660.4mm)
Air Requirement: 75 to 90 psi (5 to 6 bar)
Printer Type: Tharo H-Series Direct Thermal or Thermal Transfer Printer
Power Source: Switchable: 100V 60Hz or 230V 50Hz
Environmental: Temp 50-95°F (10-35°C) at 10-85% humidity
Standards: Built to CE safety and emissions standards. RoHS compliant upon request.